Alesis Fusion Reference Manual

Chapter 4: Advanced Features
4
217
Menu: (various modes)/Arp/Edit Arp/Setup
Parameter: Modulation Routes (Source)
Value Range: FS Function, S1 Function, S2 Function, FS(m)
Function, T1 Function, T2 Function, T3 Function, T4
Function
Each arpeggiation pattern can have up to three sources for modulation.
Your options include the T1-T4 trigger buttons, the S1-S2 buttons, and
your Foot Switch (displayed as “FS Function”). Note that “FS(m)
Function” is simply your footswitch in “momentary” mode (this mode
modulates when your foot is on the switch and reverts back to the
original state once you take your foot off the switch). Select that source
here.
Menu: (various modes)/Arp/Edit Arp/Setup
Parameter: Modulation Routes (Destination)
Destination Range: None, Latch, Latch(Mask), A/B Change, Fill
Each arpeggiation pattern has a number of things that you may want to
change during a performance (such as the latch type or active variation).
Once you’ve set your modulation source (see above), set the destination
using this parameter.

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone