Alesis Fusion Reference Manual

Chapter 3: Fusion Modes
3
59
Menu: Program/Synth/Drum/Select
Parameter: EDIT Osc
Value Range: Osc 1 to Osc 64
Choose the oscillator you’d like to edit. Since our synthesis type is set to
Drum, you have 64 oscillators to choose from.
The value in the parenthesis varies depending on what note the oscillator
has been assigned to (using the “Note” parameter on the
Synth/Osc/Select page).
Menu: Program/Synth/Drum/Select
Parameter: EDIT Drum
Value Range: Drum 1 to Drum 4
Each oscillator in the Drum Synthesis type can have up to four drum
samples. Select the individual drum sound you’d like to edit here.
Menu: Program/Synth/Drum/Select
Parameter: Enable
Value Range: On, Off
This parameter lets you enable or disable individual drum samples.
Menu: Program/Synth/Drum/Select
Parameter: Sample
Value Range: [Varies depending on samples available to the
Fusion]
You can assign one sample to each drum. Assign that sample here.

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone