Alesis Fusion Reference Manual

3
Chapter 3: Fusion Modes
158
Note: This page will look different depending on what you select for the
“Process” parameter (see below).
Menu: Song/Editor/Tracks/Process
Parameter: Process
Value Range: Clear, Crop, Cut, Copy, Paste Over, Paste Mix, Slide,
Adjust Note Gate, Adjust Note Velocity, Note Transpose,
Note Quantize, Audio Gain, Audio Fade
(Note: This parameter MUST be set to “Adjust None
Velocity” for the correct parameters to be displayed on the
remainder of the page. If your page looks different than the
one displayed above, it is probably because this parameter is
not set to “Adjust None Velocity.”)
The “Adjust Note Velocity” setting allows you to change the note
velocities of your track.
Menu: Song/Editor/Tracks/Process
Parameter: Edit Start
Value Range: (varies)
This parameter sets the point at which your edits will start to take place.
Menu: Song/Editor/Tracks/Process
Parameter: Edit End
Value Range: (varies)
This parameter sets the end point after which your track will not be
affected.

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone