Alesis Fusion Reference Manual

2
Chapter 2: Fusion Basics
34
The Clipboard
The clipboard of the Fusion is a useful tool for copying and pasting an
entire page of parameters. For example, if you want to transfer all of the
envelope settings from one program to another, you can do so without
having to write down (or remember) all the settings from one program
and then manually enter them into another program’s envelope page.
The clipboard can be used to copy settings from the following pages in
Program mode: Envelope, LFO, Filter, Bus Effects, Insert Effects, and
MasterEQ.
To use the clipboard, simply go to one of the pages listed above and
press the “Store.” Then press the “Clipboard” soft button on the upper
left. You screen should then look like the following:
Once you press the “Copy” soft button, the contents of the page you
just came from will be copied to the clipboard. Your screen will then
look something like the following (the “contents” may be different
depending on what you copy to the clipboard):
Notice that the “Paste” button has now appeared on screen and that the
page you just copied is now listed under the word “Content:”

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone