Chapter 4: Advanced Features
4
237
Creating and Deleting Modulation Routes
Menu: Program/Mod/Routes
Parameter: Varies Depending on the number and type of routes
created
Value Range: (none)
You can create up to 32 modulation routes for each program on the
Fusion. This page shows you each route’s source and destination at a
glance. The source is listed to the left of the arrow and the destination is
listed to the right.
For example, on the picture above, we can see that for Mod Route #1,
“Envelope 1” is routed to the “Volume.”
Menu: Program/Mod/Routes
Parameter: Move Up
Value Range: (none)
This button moves your currently selected mod route up in the list.
When working with lots of routes, many users find it helpful to group
similar routes together (for example, by keeping all routes with an
envelope as the source together on the list).
Menu: Program/Mod/Routes
Parameter: Move Down
Value Range: (none)
This button moves your currently selected mod route down in the list.
Again, when working with lots of routes, many users find it helpful to
group similar routes together (for example, by keeping all routes with an
envelope as the source together on the list).