Chapter 3: Fusion Modes
3
91
Menu: Program/Synth/Envelope
Parameter: Legato
Value Range: On, Off
Legato mode keeps the envelope from re-triggering if you play in legato
fashion (i.e., you play a note before releasing the last note played).
Menu: Program/Synth/Envelope
Parameter: Mode (Trigger Type)
Value Range: Normal, Freerun
This determines how the envelope will start and stop based on how the
keys are held and released.
When set to Normal, the envelope will play from the attack stage
through the sustain stage as long as the note is held. When the note is
released, the envelope will jump to its release stage.
When set to Freerun, the envelope will complete its entire cycle even if
the note is released before the envelope has completed its cycle.
Menu: Program/Synth/Envelope
Parameter: Curve
Value Range: Exp -, Linear, Exp +
Sets how your envelope will ramp up (and down) once triggered. Your
envelope will look like one of the following:
Menu: Program/Synth/Envelope
Parameter: Delay
Value Range: 0 – 30 Sec
This is the amount of time the envelope will wait before doing anything.
When the delay is set to zero, the envelope begins its attack right away.