3
Chapter 3: Fusion Modes
164
Menu: Song/Editor/Tracks/Process
Parameter: Strength
Value Range: 0-100%
This parameter sets how rigidly your track will be quantized. In other
words, a 0% setting will not quantize your track at all, whereas a 100%
setting will cause every note to “snap” to its perfect position within the
beat. Settings closer to 0% allow note timing to be more “relaxed” and
true to the original performance while settings closer to 100% make the
track more “rigid” and precise.
Menu: Song/Editor/Tracks/Process
Parameter: Swing
Value Range: 0-100%
This parameter determines how the “swing” or second quantization is
treated. Settings of 0-49% pull the second quantization closer to the first
whereas settings of 51-100% pull the second quantization closer to the
third. A setting of 50% has no swing and all quantization are equally
spaced apart.
Menu: Song/Editor/Tracks/Process
Parameter: Window
Value Range: 0-100%
This parameter lets you set the amount of “pull” that will exist for each
ideal quantized note position. At 100% all notes pull toward the nearest
quantization point. At lower percentages, notes far from a quantization
point may not be pulled.
Using this parameter, you can set how far away a note has to fall from an
“ideal” quantize position before the quantize process ignores that note.
Menu: Song/Editor/Tracks/Process
Parameter: Offset
Value Range: -1000 to +1000 pulses
This parameter lets you shift the quantization forward or backwards in
time by up to 1000 pulses.
Menu: Song/Editor/Tracks/Process
Parameter: Execute
Value Range: (none)
This button executes the current process you’ve selected.
To Next Page
Loading...
Need help?
General
