Alesis Fusion Reference Manual

3
Chapter 3: Fusion Modes
200
Metronome Settings
Menu: Global/Settings/Metro
Parameter: Enable Metronome
Value Range: On, Off
Check this box to enable the metronome during recording.
Menu: Global/Settings/Metro
Parameter: Count-in
Value Range: Off, 1-2 Measures
Many musicians like having one or two bars to “count-in” before the
sequencer starts recording the performance. Set the number of
measures you’d like to have here. If you’d like to immediately start
recording without a count-in, set this parameter to “off.”
Menu: Global/Settings/Metro
Parameter: Step
Value Range: Whole-note, Dotted half-note, Whole-note triplet,
Half-note, Dotted quarter-note, Half-note triplet, Quarter-
note, Dotted 8-note, Quarter-note triplet, 8-note
This parameter determines the length of each step.
Menu: Global/Settings/Metro
Parameter: Volume
Value Range: 0-100%
This parameter sets the volume of your metronome click.
Menu: Global/Settings/Metro
Parameter: Program
Value Range: (varies)
You can select any program for your metronome’s sound. The top row
selects the program bank and the bottom selects the individual program
you’d like to use.

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone