Chapter 4: Advanced Features
4
225
Menu: (various modes)/Arp/Edit Arp/Playback
Parameter: Scan Order
Value Range: Up, Down, Up/DnInc, Up/DnEx, Dn/Up Inc,
Dn/Up Ex
This parameter determines how your notes are sorted and played back.
The following will explain each setting in detail:
Up Plays notes according to the note order.
Down Plays the notes in the reverse note order.
Up/DownInc Plays the notes in the note order and then
plays the notes in the reverse note order. The
“inc” in the parameter name stands for
“inclusive” meaning that the first and last note
in the note order are played twice.
Up/DnEx Plays the notes in the note order and then
plays the notes in the reverse note order. The
“ex” in the parameter name stands for
“exclusive.” This means that the first and last
note in the note order are only played once.
Dn/Up Inc Plays the notes in the reverse note order and
then plays the notes in the normal note order.
The “inc” in the parameter name stands for
“inclusive” meaning that the first and last note
in the note order are played twice.
Dn/Up Ex Plays the notes in the reverse note order and
then plays the notes in the normal note order.
The “ex” in the parameter name stands for
“exclusive.” This means that the first and last
note in the note order are only played once.
Menu: (various modes)/Arp/Edit Arp/Playback
Parameter: Gate Scale
Value Range: 1 to 200%
This parameter lets you adjust the length of your arpeggiation notes. For
example, 1% causes notes to be one percent of the original length
whereas 200% causes notes to be twice as long. A setting of 100%
leaves the notes unaffected.
To Next Page
Loading...
Need help?
General
