2
Chapter 2: Fusion Basics
32
Menu: (various modes)/STORE/Store
Parameter: Bank
Value Range: (varies depending on available banks)
Your program, mix, song, or multisample can be stored in any bank
available to your Fusion. Select that bank using this parameter.
If none of the existing banks are appropriate for your needs, you can
always create a new bank using the “New Bank” button (see below).
Menu: (various modes)/STORE/Store
Parameter: #
Value Range: A-1 (000) to P-8 (127)
This program lists where your current program, mix, song, or sample will
be stored within the bank.
Note that if an existing program, mix, song, or multisample is already
occupying that spot in the bank, its name will be listed in quotes to the
right of the bank number. If the quotes are empty, it means that this
spot in the bank has never been used and that you can store in this
location without overwriting anything.
If you decide to store over an existing program, a prompt will appear
asking you to confirm that you want to overwrite the existing item with
your current item.
Menu: (various modes)/STORE/Store
Parameter: Store (action button; right side of screen)
Value Range: (none)
This button stores your current program at the location indicated by the
“Bank” and “#” parameters.
Menu: (various modes)/STORE/Store
Parameter: Rename
Value Range: (none)
This button brings up a page allowing you to rename your program. Use
the PREV/NEXT buttons to move the cursor back and forth while
using the Control Wheel to select your letters and numbers.
Menu: (various modes)/STORE/Store
Parameter: New Bank
Value Range: (none)
This button brings up a prompt allowing you to select the name and
physical location of a new bank. See page 33 for more.
Using Keys to Name Programs:
You can use the keys starting from the left-
most note on the workstation to select your
letters and numbers. Some users may find
this to be faster than using the Control
Wheel for selecting characters—especially
for longer names.
Press a key once for lowercase and twice for
uppercase. Use the PREV/NEXT buttons to
move the cursor back and forth.
Banks with more than 128 items:
Each bank of the Fusion can contain more
than 128 items (i.e., programs, mixes, songs,
multisamples, samples, or patterns).
However, we do not recommend doing this
since you will not be able to access the
programs using the Quick Access buttons or
“Program Change” messages (via MIDI).
The only way to access such items will be by
selecting them using the Control Wheel or
the INC/DEC buttons.
To Next Page
Loading...
Need help?
General
