Alesis Fusion Reference Manual

3
Chapter 3: Fusion Modes
92
Menu: Program/Synth/Envelope
Parameter: Attack
Value Range: 0 – 30 Sec
This sets the amount of time the envelope will take to reach its
maximum level. The higher the value, the slower the attack.
Menu: Program/Synth/Envelope
Parameter: Decay (not available if sustain level is set to 100%)
Value Range: 0 – 29.953 Sec, Hold
This sets the amount of time the envelope takes from the end of the
Attack stage to reach the Sustain level. The higher the value, the longer it
will take.
You can set this parameter to Hold by setting the value higher than
29.953. By doing this, the envelope will remain at maximum until it
reaches the Release stage. Since the envelope is held at maximum level,
the Sustain and Sustain Decay parameters are removed from the menu to
avoid confusion.
Envelope
Time
Slow Attack
Envelope
Time
Fast Attack
Envelope
Time
Decay Hold

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone