Alesis Fusion Reference Manual

1
Chapter 1: Fusion Hardware
20
Factory Reset
The Fusion has a “factory reset” option that will reset your global
parameters to their initial factory settings. This has been included as a
last resort option in case you have accidentally changed a global setting
and need to return the workstation back to normal quickly.
Resetting your Fusion is easy: Hold down both the Play and Record
buttons as you turn on your Fusion and wait for the unit to finish
loading. Once the Program screen is displayed, factory defaults have
been loaded, and your Fusion is ready to go.
Note that doing this does not change any of your programmed sounds,
songs, samples, or arpeggiations. Factory Reset only affects parameters
found in Global mode.

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone