Alesis Fusion Reference Manual

3
Chapter 3: Fusion Modes
46
Menu: Program/Synth/Osc/Config
Parameter: View
Value Range: Osc Enable, Osc Multisample, Osc Transpose, Osc
Coarse Tune, Osc Fine Tune, Osc Volume, Osc Pan
This screen provides a convenient overview showing how many of the
commonly used parameters in the Sample Synthesis submenus are
configured.
This page shows parameter settings of both oscillators in relation to one
another. By having these common parameters on one screen, it saves
users from having to jump back and forth between multiple oscillator
pages. You can change oscillator settings (volume, pan, tuning, etc) by
editing the “1:” and “2:” parameters.
Since our synthesis type is set to Sample Synthesis, we have two
oscillators available for editing (remember that the Sample Synthesis type
has two oscillators).
Menu: Program/Synth/Osc/Config
Parameter: X: (Crossfade)
Value Range: 0 – 100%
Sets the volume balance between each of your two oscillators. Many
users route the velocity of the keyboard to this parameter to achieve a
velocity cross-fade in which you hear more of one oscillator and less of
another as a key is struck harder.

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone