Alesis Fusion Reference Manual

3
Chapter 3: Fusion Modes
160
Note: This page will look different depending on what you select for the
“Process” parameter (see below).
Menu: Song/Editor/Tracks/Process
Parameter: Process
Value Range: Clear, Crop, Cut, Copy, Paste Over, Paste Mix, Slide,
Adjust Note Gate, Adjust Note Velocity, Note Transpose,
Note Quantize, Audio Gain, Audio Fade
(Note: This parameter MUST be set to “Note Transpose” for
the correct parameters to be displayed on the remainder of the
page. If your page looks different than the one displayed
above, it is probably because this parameter is not set to “Note
Transpose.”)
The “Note Transpose” setting allows you to shift notes either up or
down.
Menu: Song/Editor/Tracks/Process
Parameter: Edit Start
Value Range: (varies)
This parameter sets the point at which your edits will start to take place.
Menu: Song/Editor/Tracks/Process
Parameter: Edit End
Value Range: (varies)
This parameter sets the end point after which your track will not be
affected.
Menu: Song/Editor/Tracks/Process
Parameter: Transpose
Value Range: -48 to +48 semitones
This parameter determines how many semitones your selected region is
going to be shifted up or down.
Menu: Song/Editor/Tracks/Process
Parameter: Execute
Value Range: (none)
This button executes the current process you’ve selected.

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone