Alesis Fusion Reference Manual

Chapter 3: Fusion Modes
3
71
Menu: Program/Synth/Osc/Config
Parameter: View
Value Range: Osc Enable, Osc Output, Osc Type, Osc Coarse
Tune, Osc Fine Tune, Osc Random Tune, Osc Pan
This screen provides a convenient overview showing how many of the
commonly used parameters in the FM Synthesis submenus are
configured.
This page shows parameter settings of several oscillators in relation to
one another. By having these common parameters on one screen, it
saves users from having to jump back and forth between multiple
oscillator pages. You can change oscillator settings (volume, tuning, etc)
by editing to the “1:” through “6:” parameters (see below).
Since our synthesis type is set to FM Synthesis, we have six oscillators
available for editing.
Menu: Program/Synth/Osc/Config
Parameter: 1: to 6:
Value Range: Varies depending on View setting (see above)
This section provides quick access to common oscillator settings. The
contents of this parameter change depend on your “view” parameter
settings. Use the Control Wheel to adjust the listed setting.

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone