General Safety Instructions
Risks in handling the machine
The machine has been constructed to the state-of-the art and the
recognised rules of safety. However, there may be risks and re-
strictions which occur when operating the machine
• For the health and safety of the user or third persons,
• For the machine,
• For other goods.
Only use the machine
• For the purpose for which it was intended.
• In a perfect state of repair.
Eliminate any faults immediately which could impair safety.
Guarantee and liability
Our "General conditions of sales and business" are always applicable.
These shall be available to the operator, at the latest on the comple-
tion of the contract. Guarantee and liability claims for damage to peo-
ple or goods will be excluded if they can be traced back to one or
more of the following causes:
• Improper use of the machine.
• Improper installation, commissioning, operation and mainte-
nance of the machine.
• Operation of the machine with defective safety equipment or
improperly attached or non-functioning safety equipment.
• Non-compliance with the instructions in the operating manual
regarding commissioning, operation and maintenance.
• Independently-executed construction changes to the machine.
• Insufficient monitoring of machine parts which are subject to
wear.
• Improperly executed repairs.
• Disasters through the impact of foreign bodies and acts of God.
12 Cirrus BAH0049-1 09.14
To Next Page
Loading...
Need help?
General
