DANGER
Check whether the coulter frame has been folded in to transport
width.
The locking hooks (Fig. 167/1) form the mechan-
ical transport locking device and engage onto the
locking spigot (Fig. 167/2).
167
Fig.
/1) are engaged properly after
folding in the extension arms.
9. Fold out the lighting (Fig. 168/1), position
with pins (Fig. 168/2) and secure with clip
pins.
168
10. Move in the integrated running gear until
the machine is horizontal.
10.1 Actuate control unit yellow until the
machine is in a horizontal position.
169
Ensure that the machine has suff
i-
cient ground clearance in all driving
situations.
154 Cirrus BAH0049-1 09.14