4. Release the rubber loops (Fig. 174/1) to-
gether with the cover hook (Fig. 174/2).
174
5. Lift the ladder (Fig. 175/) out of its locking
device and lower it to the stop.
175
Danger of getting crushed. Hold
the ladder only at the marked
positions.
6. Climb on the loading plate via the ladder.
7. Release the rubber loops on the end face.
8. Open the swivel cover.
9. If necessary, remove foreign bodies in the
seed hopper.
10. Adjust the level sensor(s) in the seed hop-
per.
176
Cirrus BAH0049-1 09.14
157