Cleaning, maintenance and repairs
Carefully open the venting valves so that they are not turned off. It is
recommended that the valves be sprayed with a rust releasing agent
for approx. 2 hours before venting.
Perform a safety check:
• Are the venting screws tightened?
• Has sufficient brake fluid been filled?
• Check all connections for seal-tightness.
After each brake repair apply the brakes on a road with little traffic.
When doing this at least one emergency braking application must be
performed.
Caution: when you do this pay attention to any traffic behind you!
Cirrus BAH0049-1 09.14
197
To Next Page
Loading...
Need help?
General
