For communication purposes the AMATRON 3 includes
• the menu "Work"
• the main menu with 4 submenus
ο the menu "Job"
ο the menu "Seed drill calibration"
ο the menu "Machine data"
ο the menu "Setup".
• indicates the requisite data for sowing operation
• is for the purpose of operating the seed drill during the work.
In the menu "Job"
• the sowing rate is entered
• jobs are created and the data determined from up to 20 pro-
cessed jobs is stored
• the desired job is started.
In the menu "Seed drill calibration"
• the sowing rate entered is checked by way of a calibration test
and the transmission setting is corrected as necessary (option-
al).
In the menu "Machine data"
• the machine-specific settings are entered, selected or deter-
mined via a calibration process.
In the menu "Setup"
• the input and output of diagnostic data and the selection and
input of basic machine data is performed. These jobs are re-
served exclusively for customer service personnel.
66 Cirrus BAH0049-1 09.14
To Next Page
Loading...
Need help?
General
