Amazone GreenDrill GD200-E - Page 87

GreenDrill control terminal 5.2
GreenDrill BAH0054-9 11.17
87
Error message Description Remedy
The seeding shaft is not rotating Switch off control terminal.
Check whether any foreign ob-
jects are hindering the rotation of
the seeding shaft or agitator
shaft.
The seeding shaft motor
 is connected
 is not overloaded
 is not rotating
Switch off control terminal.
Contact the service partner.
The seeding shaft motor
is not wired correctly
Check the cables and plug con-
nections to the seeding shaft mo-
tor
Blower fan
with hydraulic drive
and pressure sensor
 is not rotating
 Control lamp
without function.
Back pressure in the return flow
is too high (see section 5.7.1,
page 47).