Amazone GreenDrill GD200-E - Page 88

GreenDrill control terminal 5.2
88
GreenDrill BAH0054-9 11.17
Error message Description Remedy
The blower fan is not rotating Switch off control terminal.
Check if
 foreign objects are hindering
the
rotation of the blower fan
 the calibration plate
is installed wrong
(see section 5.6, page 46)
Blower fan motor
with electric drive
 is connected
 is not overloaded
 is not rotating.
Switch off control terminal.
Contact the service partner.
The blower fan motor
with electric drive
is not wired correctly
Check the cables and plug con-
nections to the blower fan motor.