Chapter 3 — Vector Network Analyzer 3-7 VNA Key Functions - Mode Menu
MS20xxA VNA Master UG 10580-00166 Rev. C 3-47
Mode Menu
To access the Mode Menu, press the Shift key, then the Mode (9) key. The Mode Selector window
opens.
A sample list of Mode Selector choices:
• Spectrum Analyzer
• Vector Network Analyzer
• Vector Volt Meter
• Power Meter
• Interference Analyzer
• Channel Scanner
Use the rotary knob or Up/Down arrow keys to highlight the desired mode and press
Enter to
select. Press the
Esc key to close the Mode Selector window without making any changes.
The available mode selections will vary with the options installed in the particular VNA
Master.
10580-00166C.book Page 47 Thursday, February 21, 2008 12:52 PM
To Next Page