Chapter 1 — General Information 1-5 MS2026A Options
MS20xxA VNA Master UG 10580-00166 Rev. C 1-5
1-5 MS2026A Options
Options for the MS2026A 2-port VNA Master, 2 MHz to 6 GHz are:
• MS2026A-005 Power Monitor (requires external detector)
• MS2026A-010 Built-in Bias-Tee
• MS2026A-015 Vector Voltmeter
• MS2024A-019 High Accuracy Power Meter (sensors not included)
• MS2026A-031 GPS Receiver (includes GPS antenna)
1-6 MS2034A Options
Options for the MS2034A 2-port VNA Master, 2 MHz to 4 GHz Vector Network Analysis,
9kHz to 4GHz Spectrum Analysis are:
• MS2034A-005 Power Monitor (requires external detector)
• MS2034A-010 Built-in Bias-Tee
• MS2034A-015 Vector Voltmeter
• MS2024A-019 High Accuracy Power Meter (sensors not included)
• MS2034A-025 Interference Analysis, 9 kHz to 4 GHz, (requires external antenna)
• MS2034A-027 Channel Scanner, 9 kHz to 4 GHz, (requires external antenna)
• MS2034A-031 GPS Receiver (includes GPS antenna):
1-7 MS2036A Options
Options for the MS2036A 2-port VNA Master, 2 MHz to 6 GHz Vector Network Analysis,
9 kHz to 7.1 GHz Spectrum Analysis:
• MS2036A-005 Power Monitor (requires external detector)
• MS2036A-010 Built-in Bias-Tee
• MS2036A-015 Vector Voltmeter
• MS2024A-019 High Accuracy Power Meter (sensors not included)
• MS2036A-025 Interference Analysis, 9 kHz to 7.1 GHz (requires external
antenna)
• MS2036A-027 Channel Scanner, 9 kHz to 7.1 GHz (requires external antenna)
• MS2036A-031 GPS Receiver (includes GPS antenna)
Note Units with serial numbers below 0737000 sweep down to 100 kHz only.
Note Units with serial numbers below 0737000 sweep down to 100 kHz only.
10580-00166C.book Page 5 Thursday, February 21, 2008 12:52 PM
To Next Page
Loading...
