Anritsu MS2024A/MS2026A - Freq (Frequency) Menu

9-5 Freq (Frequency) Menu Chapter 9 — Interference Analyzer, Option 25
9-8 MS20xxA VNA Master UG 10580-00166 Rev. C
9-5 Freq (Frequency) Menu
The tuning frequency range for the VNA Master can be entered in several different ways
depending on what makes the most sense for the user or for the application. The center
frequency and span can be specified, the start and stop frequencies can be entered, or a signal
standard and channel number can be selected from the built-in list.
Figure 9-4. Interference Analyzer Mode Freq Menu
Back
-->
Freq Span
Span
7.100 GHz
Span Up
1-2-5
Span Down
1-2-5
Full Span
Zero Span
Last Span
Center Freq
3.550 GHz
Start Freq
0 Hz
Stop Freq
7.100 GHz
Span
Freq Step
1.000 MHz
Signal
Standard
Channel
-- --
-->
10580-00166C.book Page 8 Thursday, February 21, 2008 12:52 PM