Anritsu MS2024A/MS2026A - VNA Key Functions

Chapter 3 — Vector Network Analyzer 3-7 VNA Key Functions - Introduction
MS20xxA VNA Master UG 10580-00166 Rev. C 3-25
3-7 VNA Key Functions
Introduction
The following section is a quick reference to the principal menus in the VNA Master. For
more specific information on a particular measurement, refer to the specific chapters for the
measurement being made. The key function menus are presented in this order:
• “Amplitude Menu (Field Menu)” on page 3-26
• “Calibration Menu” on page 3-27
• “File Menu” on page 3-29
• “Freq/Dist Menu” on page 3-33
• “Limit Menu” on page 3-35
• “Marker Menu” on page 3-38
• “Measurement Menus (Field and VNA)” on page 3-40
• “Measurement Menu (VNA Menus)” on page 3-42
• “Measurement Menu (Field Menus)” on page 3-45
• “Mode Menu” on page 3-47
• “Preset Menu” on page 3-48
• “Save/Recall Menu” on page 3-49
• “Scale Menu (VNA Menus)” on page 3-49
• “Sweep Menu” on page 3-51
• “System Menu” on page 3-54
• “Trace Menu” on page 3-57
10580-00166C.book Page 25 Thursday, February 21, 2008 12:52 PM