4-24 Freq (Frequency) Chapter 4 — Spectrum Analyzer
4-34 MS20xxA VNA Master UG 10580-00166 Rev. C
4-24 Freq (Frequency)
The tuning frequency range for the VNA Master can be entered in several different ways
depending on what makes the most sense for the user or for the application. The center
frequency and span can be specified, the start and stop frequencies can be entered, or a signal
standard and channel number can be selected from the built-in list. The
Freq hard key is
located below the display. The Freq menu soft keys are shown in Figure 4-12.
Figure 4-12. Freq Menu Soft Keys
Freq
Center Freq
3.550 GHz
Start Freq
0 Hz
Stop Freq
7.100 GHz
Span
Freq Step
1.000 MHz
Signal
Standard
Channel
- -
-->
10580-00166C.book Page 34 Thursday, February 21, 2008 12:52 PM
To Next Page