1-4 MS2024A Options Chapter 1 — General Information
1-4 MS20xxA VNA Master UG 10580-00166 Rev. C
1-4 MS2024A Options
Anritsu VNA Master options are dependent upon the model purchased, as summarized in
this and the following sections. Options for the MS2024A 2-port VNA Master, 2 MHz to
4GHz are:
• MS2024A-005 Power Monitor (requires external detector)
• MS2024A-010 Built-in Bias-Tee
• MS2024A-015 Vector Voltmeter
• MS2024A-019 High Accuracy Power Meter (sensors not included)
• MS2024A-031 GPS Receiver (includes GPS antenna)
Table 1-3. Measurement Capabilities
Model Number
VNA
Frequency
SPA
Frequency
Measurements
MS2024A Handheld
VNA Master
2 MHz to
4GHz
N/A Return loss, cable loss, VSWR, 1-port
phase, 2-port phase, smith chart, 2-port
gain, group delay, Distance-to-Fault
MS2034A Handheld
VNA Master plus
Spectrum Analysis
2 MHz to
4GHz
9 kHz to
4GHz
MS2024A measurements plus high
performance spectrum analysis, channel
scanner, and interference analysis.
(See Note 1 below.)
MS2026A Handheld
VNA Master
2 MHz to
6GHz
N/A Return loss, cable loss, VSWR, 1-port
phase, 2-port phase, smith chart, 2-port
gain, group delay, Distance-to-Fault
MS2036A Handheld
VNA Master plus
Spectrum Analysis
2 MHz to
6GHz
9 kHz to
7.1 GHz
MS2026A measurements plus high
performance spectrum analysis, channel
scanner, and interference analysis.
(See Note 1 below.)
Note 1: Units with serial numbers below 0737000 sweep down to 100 kHz only.
10580-00166C.book Page 4 Thursday, February 21, 2008 12:52 PM
To Next Page
Loading...
