Chapter 11 — High Accuracy Power Meter 11-4 HAMP Menus - Mode Menu
MS20xxA VNA Master UG 10580-00166 Rev. C 11-11
Mode Menu
To access the functions under the Mode menu, select the Shift key, then the Mode (9) key. Use
the Up/Down arrow keys or the rotary knob to highlight the selection, and press the
Enter key
to select. The list of modes that appears in this menu will vary depending upon the options
that are installed and activated in your instrument. The mode menu is described in section
“Mode Menu” on page 3-47. Your instrument may not show the same list.
10580-00166C.book Page 11 Thursday, February 21, 2008 12:52 PM
To Next Page
Loading...
