4-32 System Chapter 4 — Spectrum Analyzer
4-60 MS20xxA VNA Master UG 10580-00166 Rev. C
Factory Defaults
Restores the instrument to the factory default values, including Ethernet,
language and brightness settings. Press the
Enter key to initiate the reset,
and turn the unit off, then on again to complete. Press
Esc to return to
normal operation without resetting.
Master Reset
This will restore factory setting to all system parameters, including
Time/Date, Ethernet, language and brightness settings. Also, all user files
in the internal memory are deleted, and the original language and antenna
files are restored. Press the
Enter key to initiate the reset, and turn the unit
off, then on again to complete. Press
Esc to return to normal operation
without resetting.
Update OS Via Ethernet
This soft key should only be used in conjunction with Anritsu Master
Software Tools (MST) to update the instrument operating system using an
Ethernet connection. Use this soft key only as instructed by MST.
Update OS Via USB
This soft key should only be used in conjunction with Anritsu Master
Software Tools (MST) to update the instrument operating system using a
connected USB device. Use this soft key only as instructed by MST.
Back
Returns to the previous menu.
10580-00166C.book Page 60 Thursday, February 21, 2008 12:52 PM
To Next Page