Anritsu MS2024A/MS2026A - Page 176

4-33 Trace Chapter 4 — Spectrum Analyzer
4-64 MS20xxA VNA Master UG 10580-00166 Rev. C
Recalled Traces
Brings up the Recalled Traces menu with available operations for measurement traces
that have been recalled from a storage device.
Use Recalled Setups
Pressing this soft key will change the instrument sweep state from its current
settings to those that apply to Trace Recalled A. Frequency, amplitude,
attenuation, detection method, RBW, and VBW are all among those settings that
will convert to the Recalled A settings
Recalled A View/Blank
This soft key toggles the Recalled A trace to be either visible or hidden.
Recalled B View/Blank
This soft key toggles the Recalled B trace to be either visible or hidden.
Recalled C View/Blank
This soft key toggles the Recalled C trace to be either visible or hidden.
Recalled Operations
Pressing this soft key brings up the Recalled Ops menu to allow recalled traces to
be moved into active trace locations so that Trace math and marker operations
can be performed.
Recalled A -> B
Copies the contents of Trace Recalled A into Trace B. Doing so overwrites
the previous contents of Trace B.
Recalled B -> B
Copies the contents of Trace Recalled B into Trace B. Doing so overwrites
the previous contents of Trace B.
Recalled C -> B
Copies the contents of Trace Recalled C into Trace B. Doing so overwrites
the previous contents of Trace B.
Recalled A -> C
Copies the contents of Trace Recalled A into Trace C. Doing so overwrites
the previous contents of Trace C.
Recalled B -> C
Copies the contents of Trace Recalled B into Trace C. Doing so overwrites
the previous contents of Trace C.
Recalled C -> C
Copies the contents of Trace Recalled C into Trace C. Doing so overwrites
the previous contents of Trace C.
Back
Returns to the previous menu.
Clear Recall
Removes the recalled traces from memory so that they are no longer available for
display.
Back
Returns to the previous menu.
10580-00166C.book Page 64 Thursday, February 21, 2008 12:52 PM