Anritsu MS2024A/MS2026A - Page 244

10-4 Scanner Menu Chapter 10 — Channel Scanner, Option 27
10-6 MS20xxA VNA Master UG 10580-00166 Rev. C
Channel Step Size #
Sets the number of channels to skip between displayed channels.
Back
Returns to the previous menu.
Scan Frequencies
Select scan frequencies to activate the scan frequencies menu:
Start Freq ###.### GHz, MHz, kHz, Hz
Sets the center frequency of the first channel to be displayed.
Freq Step Size
Sets the spacing between frequencies on the display.
Bandwidth
The channel bandwidth can be manually entered in GHz, MHz, kHz, or Hz.
Number of Channels
Sets the number of channels to be displayed (1 to 20).
Back
Returns to the previous menu.
Scan Custom List
Opens the Custom Scan menu.
Edit List
Edit the Signal Standard, Channel, Frequency and Bandwidth for a selected
standard.
Number of Channels ##
Sets the number of channels to be displayed (1 to 20).
Back
Returns to the previous menu.
10580-00166C.book Page 6 Thursday, February 21, 2008 12:52 PM