Chapter 3 — Vector Network Analyzer 3-7 VNA Key Functions - Limit Menu
MS20xxA VNA Master UG 10580-00166 Rev. C 3-37
Delete Point
This soft key deletes the currently active point. The active point becomes the one
immediately to the left of the point that was deleted.
Next Point Left
This soft key selects the limit point immediately to the left of the active point,
making it active for editing or deletion. With each key press, the indicator of
which point is active moves one limit point to the left until it reaches the left edge
of the screen.
Next Point Right
This soft key selects the limit point immediately to the right of the active point,
making it active for editing or deletion. With each key press, the indicator (of
which point is active) moves one limit point to the right until it reaches the right
edge of the screen.
Back
Returns to the higher-level Limit menu.
Limit Alarm On/Off
For the currently active limit line, this soft key selects (on or off) whether an alarm
beep will occur when a data point exceeds the limit.
Clear Limit
This soft key deletes all limit points for the currently active limit line and defaults to a
single limit, whose amplitude value will be selected to make it visible on the screen.
The other limit line is not altered.
10580-00166C.book Page 37 Thursday, February 21, 2008 12:52 PM
To Next Page
Loading...
