Chapter 3 — Vector Network Analyzer 3-7 VNA Key Functions - Measurement Menus (Field and VNA)
MS20xxA VNA Master UG 10580-00166 Rev. C 3-41
Procedure
To select the Measurement Menu, press the Measurement function hard key, or press the Shift
key and then the
Measure (4) key.
To change the Measurement Menu between the Field Menu and the VNA Menu:
1. Press the
Shift key and then the System (8) key.
2. Select the
Applications Options soft key.
3. Press the
Meas Menu soft key to toggle VNA or Field.
10580-00166C.book Page 41 Thursday, February 21, 2008 12:52 PM
To Next Page
Loading...
