3-12 Measurements Menu W-CDMA/HSPA+ Signal Analyzer
3-38 PN: 10580-00234 Rev. T 3GPP MG
Over-The-Air Menu
Key Sequence: Measurements > OTA
Scrambling Code: Opens the “OTA Setup Menu” on page 3-39.
Multipath: Opens the “Multipath Menu” on page 3-40.
EMF (Option 444 only): When first selected, this submenu key enables the
EMF Measurement mode. Once the EMF Measurement mode is active, this
key opens the “W-CDMA EMF Menu” on page 8-10.
Back: Returns to the “Measurements Menu” on page 3-30.
Figure 3-29. W-CDMA/HSPA+ Over-The-Air Menu
Over-The-Air
Scrambling Code
Multipath
Back
EMF
To Next Page
Loading...
