Spectrum Analyzer Verification 2-6 Spectrum Analyzer Absolute Amplitude Accuracy Verification
MT8212E and MT8213E MM PN: 10580-00255 Rev. J 2-13
Amplitude Accuracy Across Frequency Verification
This procedure is the second test that is used to verify the absolute amplitude accuracy of the Spectrum
Analyzer in the MT821xE Cell Master. The first procedure test was described in Section “50 MHz Amplitude
Accuracy Verification” on page 2-9.
Equipment Required
• Anritsu MG3692X Synthesized Signal Source
• Anritsu ML2438A Dual Channel Power Meter
• Anritsu MA2442D High Accuracy Power Sensors (2)
• 10 MHz Reference Standard
• Anritsu 34NN50A 50 ohm Adapter
• Anritsu 34RKNF50 50 ohm Adapter
• Anritsu 15NN50-1.5C RF Coaxial Cable
• Aeroflex/Weinschel 1870A Power Splitter
• Aeroflex/Weinschel 44-10 10 dB Fixed Attenuator
To Next Page
Loading...
