CPS100 SERIES OPERATION MANUAL
SECTION 6:
Front Panel Operation
Entire Contents Copyright 2018 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CPS100 Series Power Source Operation Manual Page 144 of 231
Running the Triac Dimmer test
Return to the Triac Dimmer menu by
pressing the [Esc] key.
Press the Trigger soft key to apply the test to
the unit under test. Once pressed, it changes
to Stop.
The test will run continuously till aborted by
the user. To abort a test in progress, press
the Stop soft key during a test run.
To Next Page
Loading...