MP-20x Telephone Adapter 106 Document #: LTRT-50609
User's Manual
¾ To configure the WAN Ethernet connection:
In the 'WAN Ethernet Properties' screen, click the Settings tab; the following screen
opens:
Figure 10-2: WAN Ethernet Configuration
10.1.1 Settings Tab
The top part of the screen displays general communication parameters. It is recommended
not to change the default values in this screen unless you are familiar with the networking
concepts they represent. Since your Telephone Adapter is configured to operate with the
default values, no parameter modification is necessary. You can configure the following
general connection settings:
Table 10-1: Settings Tab - Parameter Descriptions
Parameter Description
Schedule
You can configure scheduler rules in order to define time segments during
which the connection is active (via Advanced>Scheduler Rules).
To Next Page
Loading...
Need help?
General
