MP-20x Telephone Adapter 242 Document #: LTRT-50609
User's Manual
Figure 14-40: Advanced - Protocols - Edit Service
3. In the 'Service Name' field, enter the name of the service, and then click the link New
Service Ports; the 'Edit Service Server Ports' screen appears.
Figure 14-41: Advanced - Protocols - Edit Service - Server Ports
4. You may choose any of the protocols available in the drop-down list, or add a new one
by selecting 'Other'. When selecting a protocol from the drop-down list, the screen
refreshes, presenting the respective fields by which to enter the relevant information.
5. Select a protocol and enter the relevant information.
6. Click OK to save the settings.
14.13 Reboot
¾ To reboot your MP-20x:
1. In the 'Advanced' screen, click the Reboot icon; the 'Reboot' screen is
displayed.
Figure 14-42: Reboot Screen
2. Click OK to reboot MP-20x. This may take up to one minute.
3. To re-enter the Web-based management interface after rebooting MP-20x, click the
browser's Refresh button.
To Next Page
Loading...
