Version 3.0.1 37 July 2010
MP-20x Telephone Adapter 5. Configuring VoIP Parameters
5 Configuring VoIP Parameters
The VoIP parameters are configured in the 'Voice over IP' screen. This screen is opened
by clicking the 'Voice over IP' link on the menu bar to the left; the Voice over IP' screen
opens showing the tabs that allow:
'Configuring Signaling Protocol Parameters' on page 37
'Config
uring Dialing Parameters' on page 43
'Config
uring Media Streaming Parameters' on page 47
'Config
uring Voice and Fax Parameters' on page 50
'Config
uring Services Parameters' on page 54
'Configu
ring Line Settings' on page 56
'Config
uring Speed Dial Settings' on page 59
'Config
uring Telephone Interfaces' on page 62
Note: Clicking the button Advanced in the 'Voice Over IP' screens displays
additional VoIP parameters for advanced configuration.
To Next Page
Loading...
Need help?
General
