EasyManua.ls Logo

AudioCodes MP-20x - Establishing a 3-Way Conference

AudioCodes MP-20x
270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 3.0.1 69 July 2010
MP-20x Telephone Adapter 7. Making VoIP Calls
7.5 Establishing a 3-Way Conference
¾ To extend an existing call with party B into a 3-way conference by
bringing in party C when 'Flash only' is configured:
1. During a call with party B, press 'Flash'; Party B is placed on hold and you'll hear a dial
tone.
2. Dial party C's number and wait until the call is established.
3. Press 'Flash' again to put B and C in a 3-way conference.
4. To end the 3-way conference call, on-hook. Alternatively, press 'Flash' again.
¾ To extend an existing call with party B into a 3-way conference by
bringing in party C when 'Flash + digits sequence' is configured:
1. During a call with party B, press 'Flash' and then the '1' key on the phone; Party B is
now placed on hold and you'll hear a dial tone.
2. Dial party C's number and wait until the call is established.
3. Press 'Flash' and then the '3' key to put B and C in a 3-way conference.
4. To end the 3-way conference call, on-hook. Alternatively, press 'Flash' and then the '3'
key.
For configuring call transfer parameters, refer to 'Configuring Dialing Parameters' on page
43.

Table of Contents

Related product manuals