AudioCodes MP-20x - Table 12-7: Internetgatewaydevice.landevice.I.lanethernetinterfaceconfig; Table 12-8: Internetgatewaydevice.landevice.I.lanhostconfigmanagement

MP-20x Telephone Adapter 160 Document #: LTRT-50609
User's Manual
12.2.2.1.2 Configuring the LAN Interface
Table 12-7: InternetGatewayDevice.LANDevice.i.LANEthernetInterfaceConfig
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
Enable device_eic_enable_get/set
Enables or disables this interface.
MACAddress device_mac_address_get
The physical address of the interface.
MaxBitRate device_max_bit_rate_get
The maximum upstream and downstream
bit rate available for this connection:
 “10”
 “100”
 “1000”
 “Auto”
Status device_status_get
The status of the interface:
 “Up”
 “NoLink”
 “Error”
 “Disabled”
Table 12-8: InternetGatewayDevice.LANDevice.i.LANHostConfigManagement
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
AllowedMACAddres
ses
allowed_mac_addresses_g
et/set
Represents a comma-separated list of
hardware addresses that are allowed to
connect to this connection if
MACAddressControlEnabled is 1 for a
given interface.
DHCPLeaseTime dhcp_lease_time_get/set
Specifies the lease time in seconds of
client assigned addresses. A value of -1
indicates an infinite lease.
DHCPRelay dhcp_relay_get/set
Determines if the DHCP server performs
the role of a server (0) or a relay (1) on the
LAN interface.
DHCPServerEnable lan_host_config_managem
ent_get/set
rg_conf dhcps/enable
Enables or disables the DHCP server on
the LAN interface.
DNSServers dhcps_dns_servers_get/se
t
Comma-separated list of DNS servers
offered to DHCP clients. Support for more
than three DNS Servers is optional.
DomainName domain_name_get/set
Sets the domain name for clients on the
LAN interface.