Need help?Do you have a question about the AudioCodes MP-202 and is the answer not in the manual?
General| Model | MP-202 |
|---|---|
| Category | Adapter |
| Ports | 2 FXS ports |
| Protocol Support | SIP, H.323 |
| Weight | 0.5 kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Network Interface | 10/100Base-T Ethernet |
| Voice Codecs | G.711, G.729, G.723.1, G.726 |
| Security | HTTPS, TLS, SRTP |
| Management | Web-based, SNMP |
| Power Supply | 12V DC |
Accessing and configuring the device's web management interface.
Procedure for logging into the MP-202 web interface with default credentials.
Setting up essential internet connection and administrator parameters.
Main screen for configuring VoIP settings via various tabs.
Setting up SIP proxy, registrar, and related signaling parameters.
Adjusting parameters related to call dialing, timeouts, and digit mapping.
Setting up codecs, packetization time, and RTP port range for media.
Configuring voice volume, gain control, echo cancellation, and fax settings.
Configuring parameters for each telephone line, including user ID and caller ID.
Minimal configuration changes required to connect to a VoIP provider.
Steps for initiating a VoIP call using the device.
Procedures for answering incoming calls while on an active call.
Steps for transferring an existing call to a third party.
Configuring basic security settings and firewall levels for the device.
Restricting computer access to specific services or the internet.
Allowing external access to specific services or computers on the network.
Exposing a single local computer to the internet for special services.
Dynamically opening firewall ports based on outbound traffic.
Defining detailed input/output rules for comprehensive firewall control.
Methods for upgrading the device's software image.
To Next Page
