Version 2.6 77 May 1
MP-202 Telephone Adapter 9. WAN Settings
9 WAN Settings
To change the WAN mode from its default connection type (Ethernet) to PPP, choose from
the 'Connection Type' drop-down list in the Quick Setup screen. Alternatively, click link
'New Connection' in the 'Network Connections' screen, check the 'Advanced Connection'
radio button and then choose the connection type.
9.1 WAN Ethernet
WAN Ethernet is the default mode. WAN Ethernet is used to connect the MP-202 to the
network either directly or via an external modem.
¾ To access its properties:
Click on the link 'Network Connections' and in the screen 'Network Connections', click
link 'WAN Ethernet'; the screen 'WAN Ethernet Properties' opens (refer to the figure).
Figure 9-1: WAN Ethernet Properties
To Next Page
Loading...
