Name: AudioCodes MP-202
Brand: AudioCodes
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Version 2.6 35 May 1

MP-202 Telephone Adapter 5. Configuring VoIP Parameters

Parameter Description

Use SIP Proxy IP and

Port for Registration

Use the SIP proxy IP and port for registration. Default = checked. When

checked, there is no need to configure the address of the registrar

separately.

Use SIP Outbound

Proxy*

Use an outbound SIP proxy (all SIP messages will be sent to this server as

the first hop). Default = unchecked.

* This parameter appears only in 'Advanced' mode.

** This parameter appears only if the parameter 'SIP Security' is set to “Allow SIP traffic

from Proxy and Additional SIP Entity”.

Table 5-4: VoIP - Signaling Protocol - SIP Timers

Parameter Description

Retransmission Timer

The SIP T1 retransmission timer according to RFC 3261

Retransmission Timer

The SIP T2 retransmission timer according to RFC 3261

Retransmission Timer

The SIP T4 retransmission timer according to RFC 3261

INVITE Timer

The SIP INVITE timer according to RFC 3261

Other manuals for AudioCodes MP-202

Questions and Answers:

Need help?

Do you have a question about the AudioCodes MP-202 and is the answer not in the manual?

General