AudioCodes MP-202 User Manual

Version 2.6 117 May 1
MP-202 Telephone Adapter 10. VLAN and Bridge Settings
10.2.4 Bridge Settings
The bridge section allows you to specify the LAN and WAN devices that you would like to
join under the network bridge. Click the icon 'Edit' on the VLAN column to assign the
network connections to specific Virtual LANS. Select the check box 'STP' to enable the
Spanning Tree Protocol on the device. You should use this to ensure that there are no
loops in your network configuration, and apply these settings if your network consists of
multiple switches, or other bridges apart from those created by the Telephone Adapter.
Figure 10-31: Bridge Settings

AudioCodes MP-202 Specifications

General

Model	MP-202
Category	Adapter
Ports	2 FXS ports
Protocol Support	SIP, H.323
Weight	0.5 kg
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% non-condensing
Network Interface	10/100Base-T Ethernet
Voice Codecs	G.711, G.729, G.723.1, G.726
Security	HTTPS, TLS, SRTP
Management	Web-based, SNMP
Power Supply	12V DC