Name: AudioCodes MP-202
Brand: AudioCodes
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Version 2.6 85 May 1

MP-202 Telephone Adapter 9. WAN Settings

Note that PPP encryption can only be used with MS-CHAP or MS-CHAP-V2 authentication

algorithms.

Figure 9-11: PPP Encryption

Table 9-6: PPP Encryption Parameter Descriptions

Parameter Description

Require Encryption

Select this check box to ensure that the PPP connection is encrypted.

Support Encryption

(40 Bit Keys)

Select this check box if your peer supports 40 bit encryption keys.

Support Maximum

Strength Encryption

(128 Bit Keys)

Select this check box if your peer supports 128 bit encryption keys.

9.2.5 PPP Compression

The PPP Compression Control Protocol (CCP) is responsible for configuring, enabling, and

disabling data compression algorithms on both ends of the point-to-point link. It is also

used to signal a failure of the compression/ decompression mechanism in a reliable

manner.

Figure 9-12: PPP Compression

For each compression algorithm, select one of the following from the drop down menu:

Table 9-7: PPP Compression Parameter Descriptions

Parameter Description

Reject

Reject PPP connections with peers that use the compression algorithm.

Allow

Allow PPP connections with peers that use the compression algorithm.

Require

Ensure a connection with a peer is using the compression algorithm.

Other manuals for AudioCodes MP-202

Questions and Answers:

Need help?

Do you have a question about the AudioCodes MP-202 and is the answer not in the manual?

General