AudioCodes MP-202 - General; Internet Protocol Settings; Figure 10-30: Connection Summary - Configure Existing Bridge

MP-202 Telephone Adapter 116 Document #: LTRT-50605
User's Manual
Important notes:
 The same connections cannot be shared by two bridges.
 A bridge cannot be bridged.
 Bridged connections will lose their IP settings.
5. Click 'Next'; the screen 'Connection Summary' opens (refer to the figure below),
corresponding to your changes.
Figure 10-30: Connection Summary - Configure Existing Bridge
6. Check the check box 'Edit the Newly Created Connection' to be routed to the new
connection's configuration screen after clicking 'Finish'.
7. Click 'Finish' to save the settings; the new bridge is added to the network connections
list; it's configurable like any other bridge.
10.2.2 General
Refer to ''General'' on page 100.
10.2.3 Internet Protocol Settings
Refer to ''Internet Protocol Settings'' on page 79