Version 2.6 155 May 1
MP-202 Telephone Adapter 12. Security
12.8 Security Log
The Security log displays a list of firewall-related events, including attempts to establish
inbound and outbound connections, attempts to authenticate at an administrative interface
(Web-based management or Telnet terminal), firewall configuration and system start-up.
¾ To view the Security Log:
1. Click tab 'Security Log' in the screen 'Security Settings'; the screen 'Security Log'
opens.
Figure 12-29: Security Log
2. View column 'Time' to determine the time the event occurred.
3. View column 'Event' to determine the type of event. There are five types of events:
• Inbound Traffic: The event is a result of an incoming packet.
• Outbound Traffic: The event is a result of outgoing packet.
• Firewall Setup: Configuration message.
• WBM Login: Indicates that a user has logged in to WBM.
• CLI Login: Indicates that a user has logged in to CLI (via Telnet).
4. View column 'Event-Type' for a textual description of the event:
• Blocked: The packet was blocked. The message is color-coded red.
• Accepted: The packet was accepted. The message is color-coded green.
5. View column 'Details' for details of the packet or the event, such as protocol, IP
addresses, ports, etc.
To Next Page
Loading...
