AudioCodes MP-202 - PPP Authentication

Version 2.6 83 May 1
MP-202 Telephone Adapter 9. WAN Settings
Table 9-4: PPP Configuration Parameter Descriptions
Parameter Description
Service Name
Specify the networking peer's service name, if provided by your ISP.
PPP-on-Demand
Use PPP on demand to initiate the point-to-point protocol session only when
packets are actually sent over the Internet.
Time Between
Reconnect
Attempts
Specify the duration between PPP reconnected attempts, as provided by your
ISP.
Figure 9-9: PPP Configuration
9.2.3 PPP Authentication
Point-to-Point Protocol (PPP) currently supports four authentication protocols:
1. Password Authentication Protocol (PAP)
2. Challenge Handshake Authentication Protocol (CHAP)
3. Microsoft CHAP version 1
4. Microsoft CHAP version 2